JC Series Jaw Crusher

JC Series Jaw Crusher

Max. Feed Size: 720-1360 (mm)

Feed Opening Size:
100×850,1250×950,1400×1070,1600×1200,2100×1600(mm)

Application Fields: metallurgy, mining, chemical, cement, construction, etc.

Applied Material: ore with compression strength less than 300Mpa, rock, slag, etc.

 

JC Series Jaw Crushers are new type ones developed based on the introduction and absorption of US and Europe technologies on crushers. They are the preferred primary crushers for any kinds of rocks.

Product Picture 1
Product Picture 2
Workshop Picture

Solution reference

Highway Project in Aksu, Ethiopia

Highway Project in Aksu, Ethiopia

This project is located in...

Artificial Sand/Aggregates Production Line

Artificial Sand/Aggregates Production Line

1000t h Artificial Sand Ag...

Basalt Processing

Basalt Processing

Our Company’s basalt produ...

Advantage

 

1.“V” type of crushing chamber, effective opening size is equal to the nominal opening size (common jaw crusher adopts the traditional asymmetric crushing chamber structure, and effective opening size is smaller than nominal opening size)and the throughput capacity will be increased by15-20% compared with the normal crushing chamber.

2.The discharge opening applies the hydraulic adjusting unit, the optimized chamber and motion parameter make the product have greater through capacity for same clearance.

3.Smaller discharge clearance for same through capacity. The main components of frame adopt high-quality manganese steel, thickening steel plate, and finite element analysis method is used to evaluate mechanical strength in the process of design to improve the load resistance and impact during using. Cold installation process for bearing and thin oil lubrication make service life prolonged and efficiency of the rotation improved.

4.Four humanized maintenance operation units adopted for easily damaged parts of ASJ - E: bolt fastening and spring removal unit, moving jaw maintenance unit, side guard plate removal unit, adjusting seat replacement unit, so maintenance personnel can easily have inspection, maintenance and care with the four units.

 

Working principle

 

Electrical motor drives the belt wheel to make the swing jaw move following the specific track by eccentric shaft. After the materials enter into the crushing chamber, they are crushed between the two jaw plates by impacting, bending, and striking, and then discharged from the discharge opening.

Product parameters

 

Model Feed Opening Size(mm) Max. Feed Size(mm) Discharge Opening Size(mm)/Capacity(t/h) Power(kw)
40 50 60 70 80 90 100 125 150 175 200 225 250 275 300
JC80 800×510 430 50 55 80 90 110 120 135 170 200 240           75
70 85 100 125 145 170 185 240 280 330
JC90 910×630 530   90 105 115 135 150 170 200 230 270           90
130 140 165 185 200 240 270 300 345
JC100 1000×760 640       120 140 155 175 210 250 300 340         110
170 195 215 255 300 350 420 480
JC110 1100×850 720       180 200 220 245 300 350 400 460         132
240 265 295 320 385 455 520 590
JC125 1250×950 810             270 325 385 445 500 560 620     160
360 430 505 580 650 725 800
JC140 1400×1070 910               360 425 490 555 625 690 725   200
470 555 640 725 815 900 985
JC160 1600×1200 1020                 490 560 635 710 780 855 930 250
640 730 825 920 1010 1105 1200
JC210 2100×1600 1360                   800 900 1000 1100 1200 1300 450
880 1005 1125 1225 1375 1500

PEY Series Hydraulic Jaw Crusher

PEY Series Hydraulic Jaw Crusher

PLS Series Vertical Shaft Impact Crusher

PLS Series Vertical Shaft Impact Crusher

AF Series Hydraulic Cone Crusher

AF Series Hydraulic Cone Crusher

PCH Series Ring Hammer Crusher

PCH Series Ring Hammer Crusher

Name *

Email * (will not be published)

Contact Number

Construction Industry (e.g., cement, highway, railway, brick, building, etc.)

Mining Industry (e.g., gold ore, copper ore, iron ore, quartz, etc.)

CrushersMillsVibrating ScreensFeedersMobile Crushing Plant