This summer, not only there will be hot weather, but also more rainfall than in previous years, and floods have occurred in many areas. For sand and gravel plants, most of the gravel production lines are fixed production lines and operate outdoors. Moreover, some production lines are still working in remote mountainous areas in order to facilitate the production. Yes, but what are the protections for outdoor work of the crusher? Luoyang Dahua Heavy Industry Science and Technology CO., LTD. tells you how to maintain the crusher in the hot and rainy season:
The summer temperature is high, not only the working conditions of workers are difficult, in addition, the crushing equipment production line in the sand and gravel production line is mostly large-scale mechanical equipment. Affected by high temperature weather, the cooling speed of the equipment is slow after operation. Affect the production schedule. In order to ensure orderly production, the sand and gravel production line must pay special attention to the following matters during the high temperature operation in summer:
1. Pay attention to clean the oil and dust of the engine body to keep the engine good heat dissipation.
2. The maintenance of crusher equipment should be done carefully. Regularly conduct a comprehensive inspection of the equipment, do a good job in equipment maintenance, replace the engine's "three filters" and oil, replace or adjust the belt, and check whether the fan, water tank, generator, compressor and other components can operate normally.
3. Check whether the cooling system and fuel system are unblocked, and replace the aging wires, plugs, fuel pipes, screws, and tighten the fuel pipeline to prevent fuel leakage.
4. Replace the proper oil viscosity grade. Generally, the summer oil viscosity grade is higher than other times. Engine oil and lubricating oil in various places need to be replaced with summer oil, and the amount of oil is appropriate. Always check for oil leakage, especially the fuel, which should be refilled in time.
The rainy season brings a lot of inconvenience to the production of sand and gravel. The crusher is generally driven by a motor. The power supply part cannot be exposed to water, and rainwater is corrosive to steel. Therefore, the rust prevention of the crusher body, the protection of the equipment circuit, and the protection of the electric control cabinet are essential. The following maintenance techniques for the crushing equipment in the rainy season:
1. Waterproof measures should be taken for the motor part to prevent the motor from entering the rain to cause the motor to burn out and affect the normal crushing work. The water is easy to conduct, so when it rains, you should be careful to get caught and take safety precautions.
2. Do not park the mining machine too close to the edge of cliffs and ditches. All equipment should be parked in a place where the ground is solid and non-hazardous, and cannot be parked in dangerous places such as slopes, broken surfaces greater than 20 degrees, and soft ground.
3. Check the click wiring of the battery and maintain the parts of the jaw crusher. Always supply power to the battery and maintain the preheating device.
4. Rainwater is corrosive to steel. Managers and operators should take effective measures to reduce the impact of chemical corrosion on machinery based on local weather conditions and air pollution at that time.
5. Add some lubricating oil to the crusher regularly, and replace it with special lubricating oil and grease for the rainy season when it rains, and pay attention to cleaning when changing the oil.
The above are the maintenance issues that the crusher should pay attention to in the hot and rainy season. In fact, in order to minimize the impact of the environment on the crusher, coupled with the increase in environmental protection control in recent years, Luoyang Dahua Heavy Industry recommends that customers who are preparing to build a sand and gravel production line, if possible, build a sand and gravel aggregate production line workshop is not only environmentally friendly, but also reduces the impact of the environment on the crusher. If you want to know more about the production line related issues, you can click on the online consultation on the right or call the consultation phone. Luoyang Dahua Heavy Industry can design sand and gravel production line solution for you according to your specific needs and provide a complete set of equipment selection, Install and debug!