1.Licensed operating conditions
① Which oil is not allowed to fall into the classifier tank;
② Each transmission part and reducer are well lubricated, and it is not easy to add oil to the convenient place to refuel;
③ Each protective device is firm and reliable, and the electrical facilities are sensitive and reliable.
(2) Checking parts and contents before starting up
① lubrication system
② Check if the oil volume of the gearbox and the open gear grease are sufficient;
③ Check the oil supply of each bearing fueling device.
2. The various parts of the body
① Check if the screws and keys of each part are loose;
② Check the tightness of the belt;
③ Check if the spiral blade is loose and excessively worn.
④ Electrical installation;
⑤ Check if the electrical switch and limit switch are in good condition.
3. Run
① Cut into the power supply and press the start button;
② Pay attention to whether there is abnormal change;
③ Open the water supply valve;
④ It is forbidden to start when the spiral blade is buried by sand. If it is buried, the spiral part can be lifted by the lifting device; after starting, it will be slowly placed in the specified position.
4. Parking
① Stop the water supply;
② After all the sand in the tank is finished, press the stop button to stop;
③ After the parking, the spiral part should be raised into the sand surface;
④ If there is no notice of power failure or failure, immediately press the stop button and stop the water supply;
⑤ When the electrical appliance fails, the power should be cut off immediately and the electrician should be notified for repair. Do not handle it without authorization.
For more information, you can click: www.lydhchina.com