Efficient Sand Making Machine–Complex Crusher

The Product information of Complex Crusher

The complex crusher is a new type of efficient crusher equipment. Because of its large crushing ratio, good granularity of finished products, small abrasion, long service life of wearing parts, stable operation, low noise, small vibration, good sealing, easy operation, small footprint, easy installation and maintenance, application of cooling system , It can crush high-temperature materials below 150 ° C and other outstanding advantages, which are unanimously favored by the majority of users. The following is a detailed introduction to the complex crusher, which is a reference for users to invest in later.

The complex crusher is mainly composed of a chassis part, a rotor part, a cylinder part, a cover part, a transmission part, a regulating part and a lower hopper. The material falls vertically from the upper part of the crusher into the impeller of the composite crusher rotating at high speed. Under the action of high-speed centrifugal force, it shunts and crushes with another part of the material around the impeller in the form of an umbrella. After the materials collide with each other, the material will form a vortex between the impeller and the casing, which will collide and rub against each other multiple times, and will be crushed, discharged directly from the lower part, forming a closed circuit multiple cycles, and controlled by the screening equipment to achieve the required particle size. It is precisely because of this working principle of the complex crusher that this crusher is widely used in the raw material and clinker fine crushing operations of cement plants, and can also be used for dolomite, coke gemstone, lead-zinc mine, serpentine , Blast furnace slag, coal gangue, phosphate rock and other medium-hard materials fine crushing operations, especially suitable for hard limestone, dolomite, granite, basalt and other artificial sand or highway road stone processing and crushing.

Complex crusher is widely used in these industries because of their performance advantages. The finished product processed by the complex crusher becomes a cube with a large packing density and very little iron pollution. In addition, the complex crusher is suitable for crushing medium-hard and extra-hard materials. At the same time, the crusher has a small effect on the moisture content when processing these materials and the moisture content can reach about 8%. In terms of maintenance, this type of crusher uses the principle of using stone to stone, the impeller self-lining wear is small, and the maintenance is relatively convenient.