The preparing work before installation is critical to installation of jaw crusher , even will affect the quality of the installation of the jaw crusher, so what need to do before installation?Dahua summarized as follows:
1.Foundation acceptance check .
For jaw crusher vibration is large at work, the machine should be installed on concrete foundation, and the isolated barrier should be installed , in the basis of acceptance, in addition to design should be based on size and specification inspection foundation appearance size, elevation, center, the center line of the wire of the fixed signs, set aside the correctness of the anchor bolt hole position, must also test whether the foundation rigidity and bearing capacity to meet the design requirements, in order to make the second grouting layer and precoat equipment foundation is firm, the combination of the base surface should also be shoveled pockmark.
2. Foundation setting out.
Because the crusher and belt conveyor are two working procedure, therefore, the positioning line and installation datum line of a crusher with transportation equipment line must be followed.The first determine crusher installation position, again based on crusher determine the position of the auxiliary machine
3.Equipment acceptance.
Acceptance of the jaw crusher work, mainly is the packing list and equipment drawings, counting parts number, check the appearance quality.If there are defects, should be resolved as soon as possible, need to clean the parts and components, should be washed by the requirement, need beforehand assembly, should check the assembly dimension, assembly according to technical requirements.Have been counted, clean with good parts, according to the installation order, handling in place, near to the base for installation.